A `Class.UIListLayout` positions sibling UI elements in rows or columns within
the parent UI container, based on the
`Class.UIListLayout.FillDirection|FillDirection`. The
`Class.GuiObject.Position|Position` and `Class.GuiObject.Rotation|Rotation`
properties of each sibling `Class.GuiObject` are either ignored or overridden
by the list layout, while each sibling retains its defined
`Class.GuiObject.Size|Size` unless the layout is configured to utilize a flex
layout. See [List and Flex Layouts](/ui/list-flex-layouts) for
further information.

<img src="../../../assets/engine-api/classes/UIListLayout/FillDirection.png"
width="720" alt="UIListLayouts illustrating FillDirection of either horizontal
or vertical." />

To control the layout order of siblings, set
`Class.UIListLayout.SortOrder|SortOrder` to either `Enum.SortOrder.Name` or
`Enum.SortOrder.LayoutOrder`, then rename siblings in alphanumerical order or
set their `Class.GuiObject.LayoutOrder|LayoutOrder` value, respectively.
`Class.UIListLayout` will automatically re‑layout elements when elements are
added/removed, or if a sibling's `Class.Instance.Name|Name` or
`Class.GuiObject.LayoutOrder|LayoutOrder` changes.

<img src="../../../assets/engine-api/classes/UIListLayout/SortOrder.png"
width="720" alt="List layout examples illustrating numerical LayoutOrder
sorting or alphanumerical Name sorting." />

Padding between siblings is controlled through the
`Class.UIListLayout.Padding|Padding` property, and wrapping within the parent
container's bounds through the `Class.UIListLayout.Wraps|Wraps` boolean.
Alignment of siblings within the parent container is controlled through
`Class.UIListLayout.HorizontalAlignment|HorizontalAlignment` and
`Class.UIListLayout.VerticalAlignment|VerticalAlignment` unless the layout is
configured to utilize a
[flex layout](/ui/list-flex-layouts#flex-layouts).

Note that there are performance implications of using a
[flex‑enabled](/ui/list-flex-layouts#flex-layouts) list layout,
since extra calculations are needed to calculate flex basis sizes, flexed
sizes, and line wrapping. Flex is enabled on a `Class.UIListLayout` when the
following properties are set, or if any `Class.GuiObject` sibling has a
`Class.UIFlexItem` parented to it:

- `Class.UIListLayout.HorizontalFlex|HorizontalFlex` and/or
  `Class.UIListLayout.VerticalFlex|VerticalFlex` are **not** set to
  `Enum.UIFlexAlignment.None`.
- `Class.UIListLayout.ItemLineAlignment|ItemLineAlignment` is **not** set to
  `Enum.ItemLineAlignment.Automatic`.
- `Class.UIListLayout.Wraps|Wraps` is `true`.


UIListLayout

When the list layout's `Class.UIListLayout.FillDirection|FillDirection` is
set to `Enum.FillDirection.Horizontal`, the
`Class.UIListLayout.HorizontalFlex|HorizontalFlex` property specifies how
to distribute extra horizontal space in the parent container.

<table size="small">
  <thead>
    <tr>
      <th>Setting</th>
      <th>Sibling Behavior</th>
    </tr>
  </thead>
  <tbody>
    <tr>
      <td><code>Enum.UIFlexAlignment.None|None</code></td>
      <td>No flex behavior; siblings maintain their defined width.</td>
    </tr>
    <tr>
      <td><code>Enum.UIFlexAlignment.Fill|Fill</code></td>
      <td>Siblings resize horizontally to fill the entire parent container, overriding their defined width. The number of siblings in a row remain unchanged; for example, if three siblings fit horizontally within the container's width under the <code>Enum.UIFlexAlignment.None|None</code> setting, those three siblings will resize to fill the entire width.</td>
    </tr>
    <tr>
      <td><code>Enum.UIFlexAlignment.SpaceAround|SpaceAround</code></td>
      <td>Siblings maintain their defined width. Equal spacing is added on both sides of each sibling.</td>
    </tr>
    <tr>
      <td><code>Enum.UIFlexAlignment.SpaceBetween|SpaceBetween</code></td>
      <td>Siblings maintain their defined width. Equal spacing is added <b>between</b> siblings, but no additional space is added <b>around</b> siblings.</td>
    </tr>
    <tr>
      <td><code>Enum.UIFlexAlignment.SpaceEvenly|SpaceEvenly</code></td>
      <td>Siblings maintain their defined width. Equal spacing is added both <b>between</b> and <b>around</b> siblings.</td>
    </tr>
  </tbody>
</table>

<img src="../../../assets/engine-api/classes/UIListLayout/HorizontalFlex-Options.png" width="800" alt="UIListLayout examples showing how each HorizontalFlex option affects the size and spacing of sibling UI objects." />

##### Cross-Direction Behavior

In **vertical** list layouts
(`Class.UIListLayout.FillDirection|FillDirection` set to
`Enum.FillDirection.Vertical`), the
`Class.UIListLayout.HorizontalFlex|HorizontalFlex` property specifies how
to distribute the siblings across the **horizontal cross‑direction**. In
such layouts, a setting of `Enum.UIFlexAlignment.Fill` makes the siblings
fill the entire horizontal space while vertical spacing adheres to
`Class.UIListLayout.VerticalFlex|VerticalFlex`.

<img src="../../../assets/engine-api/classes/UIListLayout/HorizontalFlex-Cross-Direction.png" width="720" alt="Diagram showing how HorizontalFlex affects the horizontal size of sibling UI objects when the UIListLayout fill direction is set to vertical." />

##### AutomaticSize Interaction

If `Class.GuiObject.AutomaticSize` is enabled for a child of the
`Class.UIListLayout` in the
`Class.UIListLayout.FillDirection|FillDirection`, it is interpreted as
"automatic flex basis" and it defines the size of the `Class.GuiObject`
from which it can grow or shrink.

If `Class.GuiObject.AutomaticSize` is enabled for a child of the
`Class.UIListLayout` in the **cross‑direction**, it is interpreted as
"automatic cross size" and it defines the minimum size needed to contain
all the child's content in the cross‑direction.


UIListLayout.HorizontalFlex

Controls how to distribute extra horizontal space.


In a [flex layout](/ui/list-flex-layouts#flex-layouts), defines
the **cross-directional** alignment of siblings within a line. See
`Enum.ItemLineAlignment` for visual examples.

<table size="small">
  <thead>
    <tr>
      <th>Setting</th>
      <th>Sibling Behavior</th>
    </tr>
  </thead>
  <tbody>
    <tr>
      <td><code>Enum.ItemLineAlignment.Automatic|Automatic</code></td>
      <td>Aligns the layout's siblings or the specific <code>Class.UIFlexItem</code> parent to the layout's <code>Class.UIListLayout.HorizontalAlignment|HorizontalAlignment</code> or <code>Class.UIListLayout.VerticalAlignment|VerticalAlignment</code>, depending on its <code>Class.UIListLayout.FillDirection|FillDirection</code>.</td>
    </tr>
    <tr>
      <td><code>Enum.ItemLineAlignment.Start|Start</code></td>
      <td>Aligns the layout's siblings or the specific <code>Class.UIFlexItem</code> parent to the line's <b>top</b> in a horizontal fill or the line's <b>left</b> in a vertical fill.</td>
    </tr>
    <tr>
      <td><code>Enum.ItemLineAlignment.Center|Center</code></td>
      <td>Aligns the layout's siblings or the specific <code>Class.UIFlexItem</code> parent to the line's <b>center</b> in either a horizontal or vertical fill.</td>
    </tr>
    <tr>
      <td><code>Enum.ItemLineAlignment.End|End</code></td>
      <td>Aligns the layout's siblings or the specific <code>Class.UIFlexItem</code> parent to the line's <b>bottom</b> in a horizontal fill or the line's <b>right</b> in a vertical fill.</td>
    </tr>
    <tr>
      <td><code>Enum.ItemLineAlignment.Stretch|Stretch</code></td>
      <td>Stretches the layout's siblings or the specific <code>Class.UIFlexItem</code> parent to fill the entire cross‑direction of the line in either a horizontal or vertical fill.</td>
    </tr>
  </tbody>
</table>

<img src="../../../assets/engine-api/classes/UIListLayout/ItemLineAlignment.png" width="720" alt="Examples of options for ItemLineAlignment in a horizontal fill direction." />


UIListLayout.ItemLineAlignment

In a flex layout, defines the **cross-directional** alignment of siblings
within a line.


Determines the amount of free space between each element, set to either a
scale (percentage of the parent's size in the current direction) or an
offset (static spacing value similar to pixel size).


UIListLayout.Padding

Amount of free space between each element.


When the list layout's `Class.UIListLayout.FillDirection|FillDirection` is
set to `Enum.FillDirection.Vertical`, the
`Class.UIListLayout.VerticalFlex|VerticalFlex` property specifies how to
distribute extra vertical space in the parent container.

<table size="small">
  <thead>
    <tr>
      <th>Setting</th>
      <th>Sibling Behavior</th>
    </tr>
  </thead>
  <tbody>
    <tr>
      <td><code>Enum.UIFlexAlignment.None|None</code></td>
      <td>No flex behavior; siblings maintain their defined height.</td>
    </tr>
    <tr>
      <td><code>Enum.UIFlexAlignment.Fill|Fill</code></td>
      <td>Siblings resize vertically to fill the entire parent container, overriding their defined height. The number of siblings in a column remain unchanged; for example, if three siblings fit vertically within the container's height under the <code>Enum.UIFlexAlignment.None|None</code> setting, those three siblings will resize to fill the entire height.</td>
    </tr>
    <tr>
      <td><code>Enum.UIFlexAlignment.SpaceAround|SpaceAround</code></td>
      <td>Siblings maintain their defined height. Equal spacing is added on both sides of each sibling.</td>
    </tr>
    <tr>
      <td><code>Enum.UIFlexAlignment.SpaceBetween|SpaceBetween</code></td>
      <td>Siblings maintain their defined height. Equal spacing is added <b>between</b> siblings, but no additional space is added <b>around</b> siblings.</td>
    </tr>
    <tr>
      <td><code>Enum.UIFlexAlignment.SpaceEvenly|SpaceEvenly</code></td>
      <td>Siblings maintain their defined height. Equal spacing is added both <b>between</b> and <b>around</b> siblings.</td>
    </tr>
  </tbody>
</table>

<img src="../../../assets/engine-api/classes/UIListLayout/VerticalFlex-Options.png" width="800" alt="UIListLayout examples showing how each VerticalFlex option affects the size and spacing of sibling UI objects." />

##### Cross-Direction Behavior

In **horizontal** list layouts
(`Class.UIListLayout.FillDirection|FillDirection` set to
`Enum.FillDirection.Horizontal`), the
`Class.UIListLayout.VerticalFlex|VerticalFlex` property specifies how to
distribute the siblings across the **vertical cross direction**. In such
layouts, a setting of `Enum.UIFlexAlignment.Fill` makes the siblings fill
the entire vertical space while horizontal spacing adheres to
`Class.UIListLayout.HorizontalFlex|HorizontalFlex`.

<img src="../../../assets/engine-api/classes/UIListLayout/VerticalFlex-Cross-Direction.png" width="720" alt="Diagram showing how VerticalFlex affects the vertical size of sibling UI objects when the UIListLayout fill direction is set to horizontal." />

##### AutomaticSize Interaction

If `Class.GuiObject.AutomaticSize` is enabled for a child of the
`Class.UIListLayout` in the
`Class.UIListLayout.FillDirection|FillDirection`, it is interpreted as
"automatic flex basis" and it defines the size of the `Class.GuiObject`
from which it can grow or shrink.

If `Class.GuiObject.AutomaticSize` is enabled for a child of the
`Class.UIListLayout` in the **cross‑direction**, it is interpreted as
"automatic cross size" and it defines the minimum size needed to contain
all the child's content in the cross‑direction.


UIListLayout.VerticalFlex

Controls how to distribute extra vertical space.


Controls whether siblings within the parent container wrap to another line
when their default size exceeds the width/height of the container's
bounds.

<img src="../../../assets/engine-api/classes/UIListLayout/Wraps.png" width="800" alt="Diagram showing how Wraps affects how siblings are distributed within the parent container's bounds." />


UIListLayout.Wraps

Controls whether siblings within the parent container wrap.


Positions sibling UI elements in rows or columns within the parent UI
container.


The base class for grid style UI layouts.


This code sample demonstrates sorting data using
`Class.UIGridStyleLayout.SortOrder` and `Class.GuiObject.LayoutOrder`.


The ApplyLayout method forces sibling UI elements to be re-laid out in
case the sorting criteria may have changed (such as when
`Class.UIGridStyleLayout.SortOrder` is set to Custom, and the
`Class.UIGridStyleLayout:SetCustomSortFunction()` behavior changed).
Re-layouts automatically happen when UI elements are added/removed, or
their `Class.Instance.Name` or `Class.GuiObject.LayoutOrder` change.

The manner in which sibling UI elements are laid out is dependent on the
implementation of this abstract class. In other words, a concrete class
like `Class.UIListLayout` or `Class.UIGridLayout` is responsible for the
actual element positioning.


UIGridStyleLayout:ApplyLayout

This method is deprecated. Use `Class.UIGridStyleLayout.SortOrder`
instead.

The function should take two arguments (each will be an `Class.Instance`
child to compare), and return true if a comes before b, otherwise return
false. In other words, use this function the same way you would use a '
function. The sorting should be deterministic, otherwise sort will fail
and fall back to name order.


UIGridStyleLayout:SetCustomSortFunction

function

Sets the function used to determine the order of elements when SortOrder
is set to Custom.


UIGridStyleLayout

The **AbsoluteContentSize** property of a `Class.UIGridStyleLayout`
reveals how much space the elements of the grid are taking up, including
any padding created by the grid. This property is particularly useful to
size containers of grids such as `Class.Frame|Frames` to make sure they
aren't any larger than the grid itself.

This property updates as soon as it's read. It will not fire a
`Class.Object.Changed` event immediately after the UI has changed, but if
the value is read, it will become current and a `Class.Object.Changed`
event will fire on the next render step.


UIGridStyleLayout.AbsoluteContentSize

The absolute size of space being taken up by the grid layout.


The **FillDirection** property determines the axis in which UI elements
are laid out. `Enum.FillDirection.Horizontal` arranges objects from left
to right, while `Enum.FillDirection.Vertical` arranges objects from top to
bottom. To reverse elements, such as to arrange right to left, you'll need
to reverse the sorting; for example by negating the child UI objects'
`Class.GuiObject.LayoutOrder` values when
`Class.UIGridStyleLayout.SortOrder` is set to
`Enum.SortOrder.LayoutOrder`.

<img src="../../../assets/engine-api/classes/UIListLayout/FillDirection.png" width="720" />


UIGridStyleLayout.FillDirection

Determines the axis in which UI objects are laid out.


The **HorizontalAlignment** property determines the **X** axis alignment
of the grid of UI elements, much like `Class.TextLabel.TextXAlignment`
does with `Class.TextLabel.Text`.


UIGridStyleLayout.HorizontalAlignment

Determines the horizontal alignment of UI elements within the parent
element.


The **SortOrder** property determines the order in which child UI objects
are placed in a layout.

For `Enum.SortOrder.LayoutOrder`, an ascending sort is used on the
`Class.GuiObject.LayoutOrder|LayoutOrder` property of child UI objects. If
two children share the same `Class.GuiObject.LayoutOrder|LayoutOrder`,
whichever was added sooner to the parent object takes precedence.

For `Enum.SortOrder.Name`, an alphanumeric sort is used on the
`Class.Instance.Name` of the child UI objects.

<img src="../../../assets/engine-api/classes/UIListLayout/SortOrder.png" width="720" />


UIGridStyleLayout.SortOrder

Determines the order in which child UI objects are placed in a layout.


The **VerticalAlignment** property determines the **Y** axis alignment of
the grid of UI elements, much like `Class.TextLabel.TextYAlignment` does
with `Class.TextLabel.Text`.


UIGridStyleLayout.VerticalAlignment

Determines the vertical alignment of UI elements within the parent
element.


UILayout

A base class for UI constraint and layout classes; inherits from
`Class.UIBase`.


UIComponent

A base class for UI constraint and layout classes.


`Class.UIBase` is the base class for UI layout and constraint classes.


UIBase

`Instance` is the base class for all classes in the Roblox class hierarchy
which can be part of the `Class.DataModel` tree.

It is not possible to directly create root `Instance` objects, but the special
`Datatype.Instance.new()` constructor creates objects via code, taking the
name of the class as a parameter and returning the created object.


Demonstrates detecting changes to an instance's ancestry by connecting to the
`Class.Instance.AncestryChanged` event.

The ChangingPart's Parent is set to different values overtime. The parent of
the part is the part's ancestor, so the `Class.Instance.AncestryChanged` event
will fire whenever it changes.


Fires when this instance is reparented or when any of its ancestors is
reparented.

You can use this event to track the deletion of an instance in Studio,
such as manual deletion in the Explorer or through a plugin. If you need
to detect when an instance is destroyed using `Class.Instance:Destroy()`,
use the `Class.Instance.Destroying` event instead.


Instance.AncestryChanged

child

The instance whose `Class.Instance.Parent|Parent` property changed,
which can be this instance or a more distant ancestor, **not**
necessarily the instance the handler is connected to.


parent

The new parent of the `child` parameter.


Fires when the `Class.Instance.Parent` property of this object or one of
its ancestors is changed.


This event fires whenever any attribute is changed on the instance,
including when an attribute is set to `nil`. The name of the changed
attribute is passed to the connected function.

For example, the following code snippet connects the `attributeChanged()`
function to fire whenever one of the part's attributes changes:

```lua
local Workspace = game:GetService("Workspace")

local part = Workspace.Part

local function attributeChanged(attributeName)
	print(attributeName, "changed")
end

part.AttributeChanged:Connect(attributeChanged)
```

See also `Class.Instance:GetAttributeChangedSignal()` which returns an
event that fires when a specific given attribute changes.


Instance.AttributeChanged

attribute

The name of the attribute that has been changed.


Fires whenever an attribute is changed on the `Class.Instance`.


This snippet prints the names of objects as they are added to the Workspace:


Fires after an object is parented to this `Class.Instance`.

Note, when using this method on a client to detect objects created by the
server it is necessary to use `Class.Instance:WaitForChild()` when
indexing these object's descendants. This is because the object and its
descendants are not guaranteed to replicate from the server to the client
simultaneously. For example:

```
local Workspace = game:GetService("Workspace")

Workspace.ChildAdded:Connect(function(child)
	-- Use WaitForChild() since descendants may not have replicated yet
	local head = child:WaitForChild("Head")
end)
```

Note, this event only operates for immediate children of the
`Class.Instance`. For an event that captures all descendants, use
`Class.Instance.DescendantAdded`.

See also `Class.Instance.ChildRemoved`.


Instance.ChildAdded

The `Class.Instance` that has been added.


Fires after an object is parented to this `Class.Instance`.


Instance.childAdded

This snippet prints the names of objects as they are removed from the
Workspace:


Fires after a child is removed from this `Class.Instance`.

Removed refers to when an object's parent is changed from this
`Class.Instance` to something other than this `Class.Instance`. Note, this
event will also fire when a child is destroyed (using
`Class.Instance:Destroy()`) as the destroy function sets an object's
parent to `nil`.

This event only operates for immediate children of the `Class.Instance`.
For an event that captures all descendants, use
`Class.Instance.DescendantRemoving`.

See also `Class.Instance.ChildAdded`.


Instance.ChildRemoved

The `Class.Instance` that has been removed.


Fires after a child is removed from this `Class.Instance`.


This following example will print the name of any object that is added to the
Workspace:


This event fires after a descendant is added to the `Class.Instance`.

As it fires for every descendant, parenting an object to the
`Class.Instance` will fire the event for this object and all of its
descendants individually.

If you're only concerned with the **direct children** of the
`Class.Instance`, use `Class.Instance.ChildAdded` instead.

See also `Class.Instance.DescendantRemoving`.


Instance.DescendantAdded

descendant

Fires after a descendant is added to the `Class.Instance`.


The following example prints the name of any descendant as it is being removed
from the Workspace:


This event fires **immediately before** the parent `Class.Instance`
changes such that a **descendant** instance will no longer be a
descendant. `Class.Instance:Destroy()|Destroy()` changes an instance's
`Class.Instance.Parent|Parent` to `nil`, so calling that method on a
descendant of the parent will cause this event to fire.

Since this event fires **before** the descendant's removal, the parent of
the descendant will be unchanged at the time of this event firing. If the
descendant is also a **direct child** of the parent, this event will fire
before `Class.Instance.ChildRemoved`.

If a descendant has children, this event fires with the descendant first,
followed by its descendants.

#### Warning

This event fires with the descendant object that is being removed.
Attempting to set the `Class.Instance.Parent|Parent` of the descendant to
something else will fail. Below is an example that demonstrates this:

```
local Workspace = game:GetService("Workspace")

Workspace.DescendantRemoving:Connect(function(descendant)
	-- Do not manipulate the parent of the descendant in this function!
	-- This event fires BECAUSE the parent was manipulated, and the change hasn't happened yet
	-- Therefore, it is problematic to change the parent like this:
	descendant.Parent = game
end)

local part = Instance.new("Part")
part.Parent = Workspace
part.Parent = nil
```

See also `Class.Instance.DescendantAdded|DescendantAdded`.


Instance.DescendantRemoving

The `Class.Instance` that is being removed.


Fires immediately before a descendant of the `Class.Instance` is removed.


This sample demonstrates how, when using Immediate signal behavior, an
Instance being destroyed remains in place until the connected function yields.


This sample demonstrates how, when using Deferred signal behavior, an Instance
is destroyed before the signal fires.


The `Class.Instance` will never be deleted from memory while a connected
function is still using it. However, if the function yields at any point,
the `Class.Instance` and its descendants will be parented to `nil`.

If the `Class.Workspace.SignalBehavior` property is set to
`Enum.SignalBehavior.Immediate`, this event fires immediately before the
`Class.Instance` or one of its ancestors is destroyed with
`Class.Instance:Destroy()`.

If the `Class.Workspace.SignalBehavior` property is set to
`Enum.SignalBehavior.Deferred`, this event fires at the next resumption
point, which will be after the `Class.Instance` or one of its ancestors is
destroyed with `Class.Instance:Destroy()`.

With `Enum.SignalBehavior.Deferred|Deferred` behavior, connecting a script
to its own `Class.Instance.Destroying` event is problematic, as the script
will be destroyed before the callback can be called (meaning it will not
execute).

When deleting an `Class.Instance` in Studio, such as manually deleting
through the [Explorer](/studio/explorer) or through a plugin,
the `Class.Instance` isn't destroyed. Instead, the parent is set to `nil`
which you can track with `Class.Instance.AncestryChanged`.


Instance.Destroying

Fires immediately before (or is deferred until after) the instance is
destroyed via `Class.Instance:Destroy()`.


This event fires whenever any style property is changed on the instance,
including when a property is set to `nil`.

```lua
local Players = game:GetService("Players")

local player = Players.LocalPlayer
local playerGui = player.PlayerGui
local HUDContainer = playerGui:WaitForChild("HUDContainer")
local meterBar = HUDContainer.MeterBar

local function stylePropertyChanged()
	print("Styled properties changed")
end

meterBar:StyledPropertiesChanged():Connect(stylePropertyChanged)
```


Instance.StyledPropertiesChanged

Fires whenever any style property is changed on the instance, including
when a property is set to `nil`.


This method applies a tag to the instance, with no effect if the tag is
already applied. Successfully adding a tag will fire a signal created by
`Class.CollectionService:GetInstanceAddedSignal()` with the given tag.

#### Warnings

- An instance's tags that were added client-side will be dropped if the
  server later adds or removes a tag on that instance because the server
  replicates all tags together and overwrites previous tags.

- When tagging an instance, it is common that some resources are used to
  give the tag its functionality, for example event connections or tables.
  To prevent memory leaks, it's a good idea to clean these up (disconnect,
  set to `nil`, etc.) when no longer needed for a tag. Do this when
  calling `Class.Instance:RemoveTag()`, calling
  `Class.Instance:Destroy()`, or in a function connected to a signal
  returned by `Class.CollectionService:GetInstanceRemovedSignal()`.


Instance:AddTag

The children function returns an array of the object's children.


Instance:children

Returns an array of the object's children.


This method destroys all of an instance's children and descendants.

```
local part = Instance.new("Part")

-- Add some sparkles
for i = 1, 3 do
	local sparkles = Instance.new("Sparkles")
	sparkles.Parent = part

  local sc = Instance.new("Sparkles")
  sc.Parent = sparkles
end

print("Children:", #part:GetChildren())  --> Children: 3

part:ClearAllChildren()

print("Children:", #part:GetChildren())  --> Children: 0
```

If you do not wish to destroy **all** children and descendants, use either
`Class.Instance:GetChildren()` or `Class.Instance:GetDescendants()` to
loop through those children/descendants and select what to destroy. For
example, the following code sample will destroy all
`Class.BasePart|BaseParts` descending from a `Class.Model`:

```
local Workspace = game:GetService("Workspace")

local model = Workspace:FindFirstChild("TestModel")

for _, descendant in model:GetDescendants() do
	if descendant:IsA("BasePart") then
		descendant:Destroy()
	end
end
```


Instance:ClearAllChildren

This method destroys all of an instance's children.


Demonstrates cloning a model using `Class.Instance:Clone()`.


`Clone()` creates a copy of an instance and all of its descendants,
ignoring all instances that are not
`Class.Instance.Archivable|Archivable`. The copy of the root instance is
returned by this method and its `Class.Instance.Parent|Parent` is set to
`nil`. Note that if the instance itself has
`Class.Instance.Archivable|Archivable` set to `false`, this method will
return `nil`.

If a reference property such as `Class.ObjectValue.Value` is set in a
cloned instance, the value of the copy's property depends on the
original's value:

- If a reference property refers to an instance that was **also** cloned,
  the copy will refer to the copy.
- If a reference property refers to an instance that was **not** cloned,
  the same value is maintained in the copy.


Instance:Clone

Create a copy of an instance and all its descendants, ignoring instances
that are not `Class.Instance.Archivable|Archivable`.


Instance:clone

Demonstrates destroying a Part using the `Class.Instance:Destroy()` function.

This function is the correct way to dispose of objects that are no longer
required.


Sets the `Class.Instance.Parent` property to `nil`, locks the
`Class.Instance.Parent` property, disconnects all connections, and calls
`Destroy()` on all children. This method is the correct way to dispose of
objects that are no longer required.

Disposing of unneeded objects is important, since unnecessary objects and
connections in a place use up memory which can lead to serious performance
issues over time.

As a best practice after calling `Destroy()` on an object, set any
variables referencing the object (or its descendants) to `nil`. This
prevents your code from accessing anything to do with the object.

```lua
local part = Instance.new("Part")
part.Name = "Hello, world"
part:Destroy()
-- Don't do this:
print(part.Name)  --> "Hello, world"
-- Do this to prevent the above line from working:
part = nil
```

Once an `Class.Instance` has been destroyed by this method, it cannot be
reused because the `Class.Instance.Parent` property is locked. To
**temporarily** remove an object instead of destroying it, set
`Class.Instance.Parent|Parent` to `nil`. For example:

```
local Workspace = game:GetService("Workspace")

object.Parent = nil
task.wait(2)
object.Parent = Workspace
```

To destroy an object after a set amount of time, use
`Class.Debris:AddItem()`.


Instance:Destroy

Sets the `Class.Instance.Parent` property to `nil`, locks the
`Class.Instance.Parent` property, disconnects all connections, and calls
`Destroy()` on all children.


Instance:destroy

Returns the first ancestor of the `Class.Instance` whose
`Class.Instance.Name` is equal to the given name.

This method works upwards, meaning it starts at the instance's immediate
`Class.Instance.Parent` and works up towards the `Class.DataModel`. If no
matching ancestor is found, it returns `nil`.

The following code snippet would find the first ancestor of the object
named `Car`.

```
local car = object:FindFirstAncestor("Car")
```

For variants of this method that find ancestors of a specific class,
please see `Class.Instance:FindFirstAncestorOfClass()` and
`Class.Instance:FindFirstAncestorWhichIsA()`.


Instance:FindFirstAncestor

name

The `Class.Instance.Name` to be looked for.


Returns the first ancestor of the `Class.Instance` whose
`Class.Instance.Name` is equal to the given name.


Returns the first ancestor of the `Class.Instance` whose
`Class.Object.ClassName` is equal to the given className.

This method works upwards, meaning it starts at the instance's immediate
`Class.Instance.Parent` and works up towards the `Class.DataModel`. If no
matching ancestor is found, it returns `nil`.

A common use of this method is finding the `Class.Model` a
`Class.BasePart` belongs to. For example:

```
local model = part:FindFirstAncestorOfClass("Model")
```

This method is a variant of `Class.Instance:FindFirstAncestor()` which
checks the `Class.Object.ClassName` property rather than
`Class.Instance.Name`. `Class.Instance:FindFirstAncestorWhichIsA()` also
exists, using the `Class.Object:IsA()` method instead to respect class
inheritance.


Instance:FindFirstAncestorOfClass

className

The `Class.Object.ClassName` to be looked for.


Returns the first ancestor of the `Class.Instance` whose
`Class.Object.ClassName` is equal to the given className.


Returns the first ancestor of the `Class.Instance` for whom
`Class.Object:IsA()` returns true for the given className.

This method works upwards, meaning it starts at the instance's immediate
`Class.Instance.Parent` and works up towards the `Class.DataModel`. If no
matching ancestor is found, it returns `nil`.

Unlike `Class.Instance:FindFirstAncestorOfClass()`, this method uses
`Class.Object:IsA()` which respects class inheritance. For example:

```
print(part:IsA("Part"))  --> true
print(part:IsA("BasePart"))  --> true
print(part:IsA("Instance"))  --> true
```

Therefore, the following code sample will return the first
`Class.BasePart` ancestor, regardless of if it is a `Class.WedgePart`,
`Class.MeshPart` or `Class.Part`.

```
local part = object:FindFirstAncestorWhichIsA("BasePart")
```

See also `Class.Instance:FindFirstAncestor()`.


Instance:FindFirstAncestorWhichIsA

Returns the first ancestor of the `Class.Instance` for whom
`Class.Object:IsA()` returns true for the given className.


The below would look in Workspace for an object name "Brick". If found, it
will change the name of the object to "Foo".


Returns the first child of the `Class.Instance` with the given name, or
`nil` if no such child exists. If the optional `recursive` argument is
`true`, this method searches all descendants rather than only the
immediate children of the `Class.Instance`.

#### Checking the Existence of an Object

`FindFirstChild()` is necessary if you need to verify an object exists
before continuing. Attempting to index a child by name using the dot
operator throws an error if the child doesn't exist.

```lua
local Workspace = game:GetService("Workspace")

-- The following line errors if the part doesn't exist in the workspace
Workspace.Part.Transparency = 0.5
```

A better approach is to use `FindFirstChild()` to first check for `Part`,
then use an `if` statement to run code that needs it.

```lua
local Workspace = game:GetService("Workspace")

local part = Workspace:FindFirstChild("Part")
if part then
	part.Transparency = 0.5
end
```

#### Finding a Child Whose Name Matches a Property

Sometimes the `Class.Instance.Name|Name` of an object is the same as that
of a property of its `Class.Instance.Parent|Parent`. When using the dot
operator, properties take precedence over children if they share a name.

In the following example, a `Class.Folder` called `Color` is added to a
`Class.Part`, which also has the `Class.Part.Color` property. Notice that
`part.Color` refers to the `Datatype.Color3` property value, not the child
`Class.Folder` instance. A benefit of using
`Class.Instance:FindFirstChild()|FindFirstChild()` is that the
introduction of new properties does not impose a risk on your code.

```lua
local part = Instance.new("Part")
local folder = Instance.new("Folder")
folder.Name = "Color"
folder.Parent = part
local c1 = part.Color  -- The property
local c2 = part:FindFirstChild("Color")  -- The child folder
```

#### Performance Notes

`Class.Instance:FindFirstChild()|FindFirstChild()` takes about 20% longer
than using the dot operator and almost 8 times longer than simply storing
a reference to an object. Therefore, you should avoid calling it in
performance-dependent code such as in tight loops or functions connected
to `Class.RunService.Heartbeat` and `Class.RunService.PreRender`. Instead,
store the result in a variable, or consider using
`Class.Instance.ChildAdded|ChildAdded` or
`Class.Instance:WaitForChild()|WaitForChild()` to detect when a child of a
given name becomes available.


Instance:FindFirstChild

The `Class.Instance.Name` to be searched for.


recursive

Whether or not the search should be conducted recursively.


Returns the first child of the `Class.Instance` found with the given name.


Instance:findFirstChild

Returns the first child of the `Class.Instance` whose
`Class.Object.ClassName|ClassName` is equal to the given `className`.
Unlike `Class.Instance:FindFirstChildWhichIsA()`, this method only returns
objects whose class matches `className`, ignoring class inheritance. If no
matching child is found, this method returns `nil`.


Instance:FindFirstChildOfClass

Returns the first child of the `Class.Instance` whose
`Class.Object.ClassName|ClassName` is equal to the given class name.


Returns the first child of the `Class.Instance` for whom
`Class.Object:IsA()` returns true for the given className.

If no matching child is found, this method returns `nil`. If the optional
recursive argument is true, this method searches all descendants rather
than only the immediate children of the `Class.Instance`.

Unlike `Class.Instance:FindFirstChildOfClass()`, this method uses
`Class.Object:IsA()` which respects class inheritance. For example:

```lua
print(part:IsA("Part")) --> true
print(part:IsA("BasePart")) --> true
print(part:IsA("Instance")) --> true
```

Therefore, the following code sample will return the first
`Class.BasePart` child, regardless of if it is a `Class.WedgePart`,
`Class.MeshPart` or `Class.Part`.

```
local part = object:FindFirstChildWhichIsA("BasePart")
```

Developers looking for a child by name, should use
`Class.Instance:FindFirstChild()` instead.


Instance:FindFirstChildWhichIsA

The `Class.Object.ClassName` to be searched for.


Returns the first child of the `Class.Instance` for whom
`Class.Object:IsA()` returns true for the given className.


Returns the first descendant found with the given `Class.Instance.Name`.

This method is disabled and cannot be used. To find the first descendant
of an instance, consider using the `recursive` parameter on
`Class.Instance:FindFirstChild()` instead.


Instance:FindFirstDescendant

The `Class.Instance.Name` to search for.


Returns the first descendant found with the given `Class.Instance.Name`.


If the `Class.Instance` is an `Class.Actor`, the `Class.Actor` itself is
returned. Otherwise, its closest ancestor `Class.Actor` is returned. If no
ancestor is an `Class.Actor`, the result is `nil`.


Instance:GetActor

Returns the `Class.Actor` associated with the Instance, if any.


This method returns the value which has been assigned to the given
attribute name. If no attribute has been assigned, `nil` is returned.

For example, the following code snippet sets and then gets the value of
the instance's `InitialPosition` attribute:

```lua
local Workspace = game:GetService("Workspace")

local part = Workspace.Part
part:SetAttribute("InitialPosition", part.Position)

local initialPosition = instance:GetAttribute("InitialPosition")
print(initialPosition)
```

#### See Also

- `Class.Instance:SetAttribute()` which sets the attribute with the given
  name to the given value.
- `Class.Instance:GetAttributes()` which returns a dictionary of key‑value
  pairs for each of the instance's attributes.


Instance:GetAttribute

The name of the attribute being retrieved.


The value which has been assigned to the given attribute name. If no
attribute has been assigned, `nil` is returned.


Returns the value which has been assigned to the given attribute name.


This method returns an event that behaves exactly like the
`Class.Object.Changed|Changed` event, except that it only fires when the
specific given attribute changes; effectively it is similar to
`Class.Object:GetPropertyChangedSignal()|GetPropertyChangedSignal()` but
for attributes.

It's generally a good idea to use this method instead of a connection to
`Class.Object.Changed|Changed` with a function that checks the attribute
name. Subsequent calls to this method on the same object with the same
attribute name return the same event.

The following code example returns a signal that fires the function
`attributeChanged()` when the part's `InitialPosition` attribute changes:

```lua
local Workspace = game:GetService("Workspace")

local part = Workspace.Part
part:SetAttribute("InitialPosition", part.Position)

local function attributeChanged()
	print("Attribute changed")
end

part:GetAttributeChangedSignal("InitialPosition"):Connect(attributeChanged)
```

See also `Class.Instance.AttributeChanged` which fires whenever any
attribute is changed on the instance.


Instance:GetAttributeChangedSignal

The name of the specified attribute for which the change signal is
being returned.


An event that fires when the given attribute changes.


Returns an event that fires when the given attribute changes.


This method returns a dictionary of key‑value pairs for each attribute
where the key is the attribute's name and the value is a non‑`nil` value.

For example, the following code snippet outputs an instance's attributes
and values:

```lua
local Workspace = game:GetService("Workspace")

local part = Workspace.Part
part:SetAttribute("InitialPosition", part.Position)
part:SetAttribute("CanUse", true)

for name, value in part:GetAttributes() do
	print(name .. " = " .. value)
end
```

See also `Class.Instance:GetAttribute()` which returns the value that has
been assigned to the given attribute name.


Instance:GetAttributes

A dictionary of string → variant pairs for each attribute where the
string is the name of the attribute and the variant is a non-nil
value.


Returns a dictionary of the instance's attributes.


The below would print the name of all objects currently in Workspace when ran.


Returns an array (a numerically indexed table) containing all of the
instance's direct children, or every `Class.Instance` whose
`Class.Instance.Parent|Parent` is equal to the object. The array can be
iterated upon using either a numeric or generic `for` loop:

```lua
local Workspace = game:GetService("Workspace")

-- Numeric loop example
local children = Workspace:GetChildren()
for i = 1, #children do
	local child = children[i]
	print(child.Name .. " is child number " .. i)
end
```

```lua
local Workspace = game:GetService("Workspace")

-- Generic loop example
local children = Workspace:GetChildren()
for i, child in children do
	print(child.Name .. " is child number " .. i)
end
```

Note that the returned array is **not** sorted in any particular order, so
manual sorting (for example using `Library.table.sort()`) is advised for
sorting the children returned by this method.

See also the `Class.Instance:GetDescendants()|GetDescendants()` method.


Instance:GetChildren

An array containing the instance's children.


Returns an array containing all of the instance's children.


Instance:getChildren

Returns a coded string of the debug ID used internally by Roblox. Note
that:

- This item is protected. Attempting to use it in a `Class.Script` or
  `Class.LocalScript` will cause an error.
- A debug ID is an ID used in debugging processes. It allows a debugger to
  read each instruction before an application processes it. All objects in
  Roblox act like processes and each run instructions (or 'code') that can
  be debugged if needed.
- This can be helpful for plugins which need to distinguish similar
  objects from one-another (such as objects that share the same name).


Instance:GetDebugId

scopeLength

Returns a coded string of the debug ID used internally by Roblox.


GetDescendants is often used to do something to all the descendants that are a
particular type of object. The code in this example uses GetDescendants and
`Class.Instance:IsA()` to find all of the parts in the workspace and turns
them green.


This object method returns an array that contains all of the descendants
of that object. Unlike `Class.Instance:GetChildren()`, which only returns
the immediate children of an object, this method finds every child of the
object, every child of those children, and so on.

Note that the returned array is **not** sorted in any particular order, so
manual sorting (for example using `Library.table.sort()`) is advised for
sorting the descendants returned by this method. Also consdier the
`Class.Instance:QueryDescendants()|QueryDescendants()` method to query
descendants by a combination of selectors and combinators.


Instance:GetDescendants

An array containing the instance's descendants.


Returns an array containing all of the descendants of the instance.


This code sample demonstrates the behavior of `Class.Instance:GetFullName()`.
It shows how the function behaves when called on an object not in the
`DataModel` hierarchy, and it also shows how the return value does not escape
special characters.


This code sample re-implements the `Class.Instance:GetFullName()` function in
Lua.


Returns a string describing the instance's ancestry. The string is a
concatenation of the `Class.Instance.Name|Name` of the object and its
ancestors, separated by periods. The `Class.DataModel` (`game`) is not
considered. For example, a `Class.Part` in the `Class.Workspace` may
return `Class.Workspace.Part`.

When called on an `Class.Instance` that is not a descendant of the
`Class.DataModel`, this method considers all ancestors up to and including
the topmost one without a `Class.Instance.Parent|Parent`.

This method is useful for logging and debugging. You shouldn't attempt to
parse the returned string for any useful operation; this method does not
escape periods (or any other symbol) in object names. In other words,
although its output often appears to be a valid Luau identifier, it is not
guaranteed.


Instance:GetFullName

Returns a string describing the instance's ancestry.


This method returns the styled or explicitly modified value of the
specified property, or else the default property value if it hasn't been
styled/modified. This differs slightly from accessing the property value
directly, such as `[GuiObject].Rotation`, which returns the default or
modified value of the property.

```lua
local Players = game:GetService("Players")
local ReplicatedStorage = game:GetService("ReplicatedStorage")

local player = Players.LocalPlayer
local playerGui = player.PlayerGui
local HUDContainer = playerGui:WaitForChild("HUDContainer")

local coreSheet = ReplicatedStorage:FindFirstChild("CoreSheet")
local rule = coreSheet:FindFirstChildWhichIsA("StyleRule")
rule.Selector = "TextButton"

-- Reference to a button
local button = HUDContainer:FindFirstChildWhichIsA("TextButton")

print(button:GetStyled("Rotation")) --> 0 (default value)
print(button.Rotation) --> 0 (default value)

-- Apply rotation through style rule property
rule:SetProperty("Rotation", 30)

print(button:GetStyled("Rotation")) --> 30 (styled value based on rule)
print(button.Rotation) --> 0 (default value)

-- Explicitly modify/override styled property
button.Rotation = 45

print(button:GetStyled("Rotation")) --> 45 (modified value)
print(button.Rotation) --> 45 (modified value)
```


Instance:GetStyled

selector

Optional selector for the pseudo instance you are targeting on the
instance.


The styled or explicitly modified value of the specified property, or
else the default property value if it hasn't been styled/modified.


Returns the styled or explicitly modified value of the specified property,
or else the default property value if it hasn't been styled/modified.


This method returns an event that behaves exactly like the
`Class.Instance.StyledPropertiesChanged|StyledPropertiesChanged` event,
except that it only fires when the given style property changes. It's
generally a good idea to use this method instead of a connection to
`Class.Instance.StyledPropertiesChanged|StyledPropertiesChanged` with a
function that checks the property name. Subsequent calls to this method on
the same object with the same property name return the same event.

Note that this event will not pass any arguments to a connected function,
so the value of the changed property must be read directly within a
script.

```lua
local Players = game:GetService("Players")

local player = Players.LocalPlayer
local playerGui = player.PlayerGui
local HUDContainer = playerGui:WaitForChild("HUDContainer")
local meterBar = HUDContainer.MeterBar

local function stylePropertyChanged()
	print("Style property changed!")
end

meterBar:GetStyledPropertyChangedSignal("AnchorPoint"):Connect(stylePropertyChanged)
```


Instance:GetStyledPropertyChangedSignal

property

Name of the style property for which to listen for changes.


Event that fires when the given style property changes.


This method returns an array of the tags applied to the given instance, as
strings. You can add tags either in Studio in the
[Properties](/studio/properties) window or at runtime with
`Class.Instance:AddTag()|AddTag()`.

This method is useful when you want to do something with multiple tags on
an instance at once. However, it is inefficient to use this method to
check for the existence of a single tag; instead, use
`Class.Instance:HasTag()|HasTag()` to check for a specific tag.


Instance:GetTags

Gets an array of all tags applied to the instance.


This method returns `true` if the provided tag has been added to the
object. You can add tags either in Studio in the
[Properties](/studio/properties) window or at runtime with
`Class.Instance:AddTag()|AddTag()`.


Instance:HasTag

Check whether the instance has a given tag.


Demonstrates determining if one instance is the ancestor of another using
`Class.Instance:IsAncestorOf()`

Workspace and SpawnLocation are ancestors of the SpawnLocation's decal.
Workspace is an ancestor of SpawnLocation.

SpawnLocation and its decal are descendants of Workspace, not ancenstors.
Decal is a descendant to SpawnLocation, not an ancestor.


Returns true if an `Class.Instance` is an ancestor of the given
descendant.

An `Class.Instance` is considered the ancestor of an object if the
object's `Class.Instance.Parent` or one of it's parent's
`Class.Instance.Parent` is set to the `Class.Instance`.

See also, `Class.Instance:IsDescendantOf()`.


Instance:IsAncestorOf

True if the `Class.Instance` is an ancestor of the given descendant.


Returns true if an `Class.Instance` is an ancestor of the given
descendant.


Returns `true` if an `Class.Instance` is a descendant of the given
ancestor.

Note that `IsDescendantOf()` cannot be used with a parameter of `nil` to
check if an object has been removed.

See also `Class.Instance:IsAncestorOf()`.


Instance:IsDescendantOf

Returns `true` if an `Class.Instance` is a descendant of the given
ancestor.


Instance

`Instance` is the base class for all classes in the Roblox class hierarchy
which can be part of the `Class.DataModel` tree.


/reference/engine/classes/UIListLayout.yaml